HOMEABOUTPRODUCTSNEWSCONTACTDEFINITIONS
BOXCOILDRUMINGOTPALLETPAPERPIPESHEETSTRUCTURALWOODCRANES
CLAMPSGRABSGRIPSHOISTSHOOKSINTERNALLIFTERSSPREADERSTONGSWHEELS

Series 70 Rack and Pinion Coil Grabs

These grabs are for handling coiled material having an open core such as steel and aluminum. This grab only requires a narrow aisle for removal of tong arms enabling coils to be stacked close together and therefore saving valuable floor space.

The grabs operate using Down's standard worm gear box including our manual ratchet brake. This arrangement provides for two forms of braking on the grab to keep it from opening up under load.

The pads on the tong are curved and all parts that may contact the load are smoothly finished to minimize the chance of damaging the load.

RACK AND PINION COIL GRAB RACK AND PINION COIL GRAB LINE ART
Item
Number
Capacity A B C HR D
Min Max
70-100-60 10,000 LBS 5 3 20 43 20 60
70-150-60 15,000 7 4 22 45 3/4 20 60
70-200-60 20,000 7 4 24 48 3/4 20 60
70-300-72 30,000 9 5 28 58 1/2 24 72
70-400-72 40,000 9 5 33 63 3/4 24 72
70-500-72 50,000 12 6 35 72 3/4 24 72
70-600-72 60,000 12 6 36 73 1/4 24 72

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Send mail to Webmaster@DownsCrane.com with questions or comments about this web site.
Copyright 2000 Downs Crane & Hoist Co., Inc.
Last modified: February 21, 2011