HOMEABOUTPRODUCTSNEWSCONTACTDEFINITIONS
BOXCOILDRUMINGOTPALLETPAPERPIPESHEETSTRUCTURALWOODCRANES
CLAMPSGRABSGRIPSHOISTSHOOKSINTERNALLIFTERSSPREADERSTONGSWHEELS

Unmounted Steel Crane Wheels

These double flanged cast steel crane wheels are suitable for all types of power driven cranes. They are designed with treads and flanges of the proper contour to operate on the runway rails with a minimum of friction and wear. The treads may be finished straight, tapered or crowned. Flanges are heavy and may be finished for lighter rails than the maximum sizes listed. Wheels may be adapted to any style of mounting and fitted with any type of bearing.

Wheels will be furnished either "Rough Cast" or "Finished", as ordered.

Rough Cast
Wheels are supplied with sufficient excess material to finish to the dimensions listed in the table below.
Finished
Wheels are supplied machined to the purchasers' specifications. Rail size should be specified, otherwise wheels will be finished with straight treads for the maximum size rail, as listed in table below.

Note: The cored hole diameter "DI" in the table below may be varied to suit and either core diameter or finished bore dimensions must be specified.

We have a number of wheel patterns, which are not listed, and solicit your inquiries for crane wheels of any style or size.

Double Flanged Wheel

Pin & Keeper Line Art

ITEM
NO.
TREAD
DIA.
(IN)
HUB
TYPE
CAPACITY
PER WHEEL
(LBS)
FOR MAX.
A.S.C.E
RAIL
(# RAIL)
WGT.
(LBS)
DIMENSIONS IN INCHES
A B CI DI EI FI GI
3543 7-1/2 SHORT 8,000 30 36 7-1/2 8-3/4 4-1/4   1-13/16 3-1/8   3-5/8
3544 7-1/2 LONG 8,000 30 42 7-1/2 8-3/4 4-1/4   1-13/16 3-1/8 5-1/8
3549 9 SHORT 10,000 35 47 9 10-1/2 4-3/4   1-13/16 3-1/8   3-5/8
3550 9 LONG 10,000 35 51 9 10-1/2 4-3/4   1-13/16 3-1/8 5-1/8
3553 10 SHORT 12,000 50 81 10 11-1/2 5-1/2   2-1/8 3-3/4 4-1/4
3554 10 LONG 12,000 50 90 10 11-1/2 5-1/2   2-1/8 3-3/4 5-3/4
3555 10-1/2 SHORT 12,000 40 63 10-1/2 11-3/4 5-1/4   1-15/16 3-3/8 3-7/8
3556 10-1/2 LONG 12,000 40 71 10-1/2 11-3/4 5-1/4   1-15/16 3-3/8 5-3/8
3561 12 SHORT 12,500 40 73 12 13-1/4 5-1/2   1-15/16 3-3/8 3-7/8
3562 12 LONG 12,500 40 81 12 13-1/4 5-1/2   1-15/16 3-3/8 5-5/8
3563 12 SHORT 15,000 60 97 12 13-1/2 5-1/2   2-5/16 4-1/8 4-5/8
3564 12 LONG 15,000 60 106 12 13-1/2 5-1/2 SEE 2-5/16 4-1/8 6-3/8
3569 15 SHORT 17,500 50 115 15 16-1/2 5-7/8 NOTE 2-3/16 3-7/8 4-3/8
3570 15 LONG 17,500 50 125 15 16-1/2 5-7/8 ABOVE 2-3/16 3-7/8 6-3/8
3573 15 SHORT 20,000 70 150 15 16-1/2 5-3/4   2-3/8 4-1/4 4-3/4
3574 15 LONG 20,000 70 160 15 16-1/2 5-3/4   2-3/8 4-1/4 6-3/4
3577 18 SHORT 30,000 70 185 18 19-1/2 7   2-3/8 4-1/4 4-3/4
3578 18 LONG 30,000 70 206 18 19-1/2 7   2-3/8 4-1/4 7
3585 21 SHORT 50,000 80 321 21 22-3/4 9-1/4   2-13/16 5 5-5/8
3586 21 LONG 50,000 80 363 21 22-3/4 9-1/4   2-13/16 5 8-1/8
3593 24 SHORT 70,000 100 442 24 25-3/4 9-1/2   2-15/16 5-1/4 5-7/8
3594 24 LONG 70,000 100 464 24 25-3/4 9-1/2   2-15/16 5-1/4 8-5/8

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Send mail to Webmaster@DownsCrane.com with questions or comments about this web site.
Copyright 2000 Downs Crane & Hoist Co., Inc.
Last modified: February 21, 2011