Downs Spur Pad Box Hooks

Spur Pad Box hooks are used for handling boxes and crates of all descriptions. The hooks are listed in capacities suitable for the largest crates made. These hooks have large pressure pad to distribute the clamping load over a large area. The heat treated turned steel spurs are easily replaced when damaged or worn. A roller is provided in the shank of the hook for the sling to opesrate over. Complete slings can be found here.
Item Number Capacity 2 Hooks Dimensions Number of Spurs Grade 100 Chain Size Weight
Reach Width
343 2,000 lbs 5 3/8" 5" 5 Each 9/32" 11 lbs
344 4,000 6 5 1/2 5 9/32 14
345 6,000 7 6 1/2 8 3/8 28
346 10,000 9 6 1/2 9 3/8 31
347 15,000 9 7 12 1/2 41
348 20,000 10 1/2 8 12 1/2 72
341 Replacemnet Spurs 0.2
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

Note:The chain slings listed in table must meet or exceed all existing OSHA, ANSI, NACM and ASTM specifications requirements. All Grade 100 chain slings listed above are rated at a horizontal angle of 45°. If Grade 80 is used, check with sling manufacturer for appropriate horizontal angle.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts