Downs Series 71 Counter Weighted Coil Hook

These hooks are for lifting, transporting, and handling of steel and aluminum coiled material. Hooks are counterweighted to balance and hang level at all times for easy insertion and removal from coil.

Constructed of high strength steel, all corners and surfaces that will contact the coil are properly radiused, smoothed and curved to eliminate stress concentrations and prevent damage to the edges and inner surface wraps of the coil material.

Item Number Capacity Coil Width Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. H Dim. K Weight
Min. Max.
1 1/2 Ton
71-30-18 3,000 lbs 12" 18" 10" 16" 20" 5" 3" 5 3/4" 1 3/4" 5 5/8" 150 LBS
71-30-24 3,000 18 24 13 22 20 5 1/2 3 6 1/4 1 3/4 5 5/8 180
71-30-30 3,000 24 30 16 28 20 6 3 6 3/4 1 3/4 5 5/8 215
71-30-36 3,000 30 36 19 34 20 6 1/4 3 7 1 3/4 5 5/8 248
71-30-48 3,000 36 48 25 43 20 7 3 7 3/4 1 3/4 1 5/8 319
71-30-60 3,000 48 60 31 55 20 7 1/2 3 8 1/4 1 3/4 1 5/8 394
3 Ton
71-60-18 6,000 12 18 10 16 20 5 3/4 4 7 7/8 3 1/8 2 5/8 288
71-60-24 6,000 18 24 13 22 20 6 1/4 4 8 3/4 3 1/8 2 5/8 335
71-60-30 6,000 24 30 16 28 20 6 3/4 4 8 7/8 3 1/8 2 5/8 389
71-60-36 6,000 30 36 19 34 20 7 4 9 1/8 3 1/8 2 5/8 441
71-60-48 6,000 36 48 25 43 20 8 4 10 1/8 3 1/8 2 5/8 541
71-60-60 6,000 48 60 31 55 20 8 3/4 4 10 7/8 3 1/8 2 5/8 720
5 Ton
71-100-24 10,000 18 24 13 22 24 7 1/2 4 9 1/2 3 2 3/4 459
71-100-36 10,000 24 36 19 31 24 9 4 11 3 2 3/4 503
71-100-48 10,000 36 48 25 43 24 9 1/8 4 12 1/2 4 1/2 3 5/8 975
71-100-60 10,000 48 60 31 55 24 9 3/8 4 12 3/4 4 1/2 3 5/8 1,099
71-100-72 10,000 60 72 37 67 24 9 3/8 4 14 1/4 6 5 1,510
7 1/2 Ton
71-150-36 15,000 24 36 19 31 27 9 1/8 4 12 1/2 4 3 5/8 947
71-150-48 15,000 36 48 25 43 27 10 3/8 4 13 3/4 4 3 5/8 1,228
71-150-60 15,000 48 60 31 55 27 10 1/8 4 15 1/4 5 3/4 5 1,665
71-150-72 15,000 60 72 37 67 27 10 7/8 4 16 5 3/4 5 1,995
10 Ton
71-200-36 20,000 24 36 19 31 27 9 1/8 4 13 3/4 5 1/4 5 1,247
71-200-48 20,000 36 48 25 43 27 10 5/8 4 15 1/4 5 1/4 5 1,606
71-200-60 20,000 48 60 31 55 27 11 5/8 4 16 1/4 5 1/4 5 1,953
71-200-72 20,000 60 72 37 67 27 12 5/8 4 17 1/4 5 1/4 5 2,297
15 Ton
71-300-48 30,000 36 48 25 43 30 11 3/4 4 1/2 16 3/4 5 3/4 5 3/4 2,282
71-300-60 30,000 48 60 31 55 30 12 3/4 4 1/2 17 3/4 5 3/4 5 3/4 2,704
71-300-72 30,000 60 72 37 67 30 13 3/4 4 1/2 18 3/4 5 3/4 5 3/4 3,191
20 Ton
71-400-48 40,000 36 78 25 43 30 12 5 1/2 19 3/4 8 1/2 7 1/4 3,217
71-400-60 40,000 48 60 31 55 30 13 5 1/2 20 3/4 8 1/2 7 1/4 3,928
71-400-72 40,000 60 72 37 67 30 13 3/4 5 1/2 21 1/2 8 1/2 7 1/4 4,355
25 Ton
71-500-48 50,000 36 48 25 43 30 13 1/4 5 1/2 20 1/2 8 7 1/4 3,692
71-500-60 50,000 48 60 31 55 30 14 1/4 5 1/2 21 1/2 8 7 1/4 4,311
71-500-72 50,000 60 72 37 67 30 15 1/4 5 1/2 22 1/2 8 7 1/4 4,924
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts