Series 75 Loose Hook Coil Grabs or Spreaders

These grabs are for handling any coiled material having an open core, such as steel or aluminum. Loose hook coil grabs save space in storage and handling areas due to narrow legs along the edge of the coil and shallow feet that go into the coil. Adjustments are made by lowering the leg down onto the ground and lifting large master link to the new position.

All parts that may contact the load are smoothly finished to minimize chance of damage to the coiled material.

Item Number Capacity Dim. A Dim. B Dim. C Dim. D Dim. HR Dim. W
Min. Max.
75-200-48 20,000 LBS 5" 9" 3" 24" 76" 18" 48"
75-200-60 20,000 5 9 3 24 76 18 60
75-300-60 30,000 5 10 3 28 81 24 60
75-300-72 30,000 5 10 3 28 81 24 72
75-400-60 40,000 5 1/2 11 3 33 89 24 60
75-400-72 40,000 5 1/2 11 3 33 89 24 72
75-500-72 50,000 6 12 3 35 92 24 72
75-500-84 50,000 6 12 3 35 96 24 84
75-600-72 60,000 7 14 3 36 99 30 72
75-600-84 60,000 7 14 3 36 99 30 84
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts