True Roll Jib Crane

Downs True Roll - Series 564

Downs Series 564 Jib Cranes are of the self-supporting type and require no top bracing of any kind. They require very little headroom and will turn through a full 360 degrees. These cranes are excellent for use in machine and fabrication shops or for loading and unloading of trucks and storage areas. They also should be considered for all locations where a crane is required and overhead supports, struts, or guy-lines are not available or cannot be used.

The clear height under the jib and the jib length may be changed to suit operating conditions. The jib beam will accommodate any standard trolley equipped with a pneumatic, electric or hand operated chain hoist. of nominal lifting speed (25 fpm or less). Contact Sales if higher lift speeds are used.

Downs True Roll Jib Cranes are equipped with special direct contact rollers and thrust assemblies, allowing for easy rotation of the jib even while under full load. All bearings are factory lubricated for long life. True Roll Jib Cranes can be base mounted or insert mounted.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts