Geared Drum & Barrel Turners

May be suspended form an overhead hoist to tilt, turn and hold drums in position for emptying. The totally enclosed worm and miter gear unit will turn the heaviest drums with a minimum of effort. Head of drum may be rotated from the vertical position through 135° degrees which is sufficient for most dumping and draining operations.

Hooks are easily and quickly attached to the drum which may be in either vertical or horizontal position.

Item # 205-1 and # 205-3 are furnished with a handwheel for use when the tilting operation is within reach of the operator.

Item # 205-2 and # 205-4 are provided with a chain pocket wheel, chain guide and 12 feet of hand chain for remote control of the dumping operation.

Item Number Capacity Drum Lengths Operation Hook Type Weight
Min. Max.
205-1 1,000 LBS 24" 38" Handwheel Counter Hook 176
205-2 1,000 24 38 Hand Chain Counter Hook 176
205-3 1,000 24 38 Handwheel Barrel Hook 185
205-4 1,000 24 38 Hand Chain Barrel Hook 200
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2021 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts