Spider Trunnion Manual Drum & Barrel Turners

Manual drum turner, in both hinged and chain type bails, fitted with plain spider type trunnions.

The trunnions are designed to be permanently installed on drums, troughs, bins, buckets, etc. They may be bolted riveted, welded or brazed to the container. The bails are quickly detachable from the trunnions. Additional trunnions may be purchased to equip any number of containers for use with a single bail.

These drum turners are particularly useful where material such as parts, castings, etc. are to be stored in drums or other containers which may be equipped with trunnions. The quickly attached bail will make a simple operation of subsequent handling and dumping.

Item Number Capacity Style Width Clear Height Clear Height Max. Weight
215 1,000 LBS Hinged Bail 24" 19" 28" 28 LBS
216 2,000 LBS Hinged Bail 24" 19" 30" 37 LBS
218 1,000 LBS Chain 24" 26" 31" 22 LBS
219 2,000 LBS Chain 24" 26" 32" 29 LBS
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts