Pipe End Hook Slings

Downs' Pipe End Hook Sling

Pipe End Hooks will handle both plain and threaded pipe without damage to the material. The weight of the pipe Is carried on a pad which extends through the end coupling into the pipe itself. The hooks are suitable for all steel pipe two-inch inside diameter and larger.

The various combinations are suitable for lifting from one up to five equal length pipe sections at each lift. If a longer or shorter reach is required, the proper dimension must be specified, otherwise the sling with a reach as listed, will be shipped.

Capacity Wire
52-376 376-Single Hook 2,000 LBS 3/8" 20'-0" 26 LBS
52-255 255-Two Hook Cluster 4,000 1/2 20'-0" 41
52-256 256-Three Hook Cluster 6,000 5/8 20'-0" 95
52-257 257-Four Hook Cluster 8,000 3/4 20'-0" 115
52-258 258-Five Hook Cluster 10,000 7/8 20'-0" 141
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2021 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.