Series 377 Pipe Tongs

Downs Series 377 Pipe Tongs

Downs 377 Series Pipe Tongs are for handling pipe or bar of a specific diameter.

Downs 377 Series Pipe Tongs are designed with the same features as Downs Heavy Duty Pipe and Bar Tongs. One such outstanding feature is the specially shaped arms which facilitate selecting and picking a pipe or bar out of a pile or off the floor. These uniquely designed arms cal lift large or small bars and pipe directly off the floor surface by wedging under the item, thus eliminating the necessity to blocking under the item. Downs Pipe and Bar Tongs can easily be used by one man to handle a wide variety of material.

All sizes are provided with a semi-automatic latch hold open latch. With the latch locked in place, the tong remains open. Then the tong is lowered onto the load the latch then releases and the load can be lifted..

The minimum dimension given in the table is the minimum size the tong will clamp onto. Smaller material will just rest on the lower jaw and may slip out if not lifting from the center or sudden stops or starts.

Item Number Capacity Jaw
Will
Open
Material O.D. Weight
Min. Max.
377-3-4 300 LBS 4-1/2" 1" 4" 7 LBS
377-5-7 500 8 2 7 11
377-7 1/2-7 750 8 2 7 28
377-7 1/2-10 750 11-1/2 3 10 23
377-10-12 1,000 13-3/4 4 12 46
377-20-13 2,000 15 5 513 103
377-60-18 6,000 19 6 18 198
377-60-20 6,000 21 10 20 249
377-60-24 6,000 25 12 24 298
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts