A manually operated sheet lifter suitable for use where sheets of various widths must be handled and the quantities are not large.
The adjusting pins are locked in place, button-release-type for rapid hand adjustment without the aid of tools.
The six (6) inch increments of sheet width adjustment are adequate for most applications.
| Item Number | Capacity | For Sheet Widths-Dim E |
Weight | Dimension | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Min. | Max. | A | B | C | F | |||||
| 2 Ton | ||||||||||
| 542-40-48 | 4,000 LBS | 24" | 48" | 190 LBS | 30" | 10" | 72" | 5 3/4" | ||
| 3 Ton | ||||||||||
| 542-60-48 | 6,000 | 24 | 48 | 227 | 30 1/2 | 10 | 72 | 6 1/4 | ||
| 542-60-54 | 6,000 | 30 | 54 | 293 | 31 | 10 | 84 | 6 1/4 | ||
| 5 Ton | ||||||||||
| 542-100-48 | 10,000 | 24 | 48 | 357 | 31 1/2 | 12 | 84 | 7 1/2 | ||
| 542-100-60 | 10,000 | 48 | 60 | 374 | 31 1/2 | 12 | 84 | 7 1/2 | ||
| Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions. | ||||||||||
The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.
Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.
Copyright © 2021 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.
