Series 107 Load Concentrator Beam

Series 107

Load concentrator beams are used when loads need to be lifted on two hoists but must be lifted from a single point.

Series 107 concentrator beams are the standard load concentrator. Series 107 concentrators are desirable when it is best to have swivel hooks connecting to your load. Swivel hooks change orientation to allow for a versatile connection point.

Lifting eyes are made from mild steel and upper inside edges are ground to protect crane hook. Lateral stiffeners are also added to stiffen concentrator beam.

Ends of channel are beveled to help protect users from sharp points. Oversized Swivel Hook with latch is standard to allow for more room to insert slings. If price is of more concern than convenience, ask salesperson to quote with minimum hook size Sales@DownsCrane.com.

Special Fittings and arrangements are available. Please ask salesperson Sales@DownsCrane.com.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts