Series# 299 Beam Hanger Clamps

Beam Hanger Clamps are used as either temporary or permanent fixtures for suspending loads of any nature from an overhead beam. Constructed of cast steel. and plate with a large factor of safety, they are easily end quickly installed with a wrench as the only tool required.

Furnished for beams of the minimum size as listed, they may however easily be fitted on any beam up to the maximum listed by Inserting spacers and using longer bolts to suit. When ordering, state beam size to be used.

Item Number Capacity Will Fit
Std. Ibeams
Weight Dimension
Min. Max. A B C D E
299-20 2,000 LBS 5"x10# 12"x40.8# 9 LBS 1" 1/2" 1" 5 1/2" 3"
299-40 4,000 6"x12.5# 15"x42.9# 12 1 1/8 5/8 1 1/4 6 3/8" 3 1/2
299-60 6,000 8"x18.4# 18"x54.7# 22 1 1/4 3/4 1 1/2 7 1/2 4
299-100 10,000 10"x25.4# 24"x105.9# 43 1 1/2 1 1 3/4 9 1/8 5 1/4
299-200 20,000 12"x31.8# 24"x105.9# 117 1 1/2 1 3/8 2 10 1/2 21
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.