Die Block Tongs

Downs Die Block Tongs are designed for lifting heavy steel dies. They are adjusted to fit the different sizes in their range by twisting the knurled knob on the shaft.

Item
Number
Capacity MATERIAL
SIZE
Weight
11874-0-MOD 500 LBS 2 TO 7" 45 LBS
11874-1 3,000 7 TO 10 1/2 40
11874-2 3,000 9 TO 14 1/2 48
11874-3 3,000 11 TO 16 1/2 55
11874-4 3,000 14 TO 24 1/2 65
12440 3,000 17 TO 30 78
12441 6,000 18 TO 30 111
12459 6,000 21 1/8 TO 36 127
660-60-34 6,000 20 TO 34 119
660-60-48 6,000 26 1/2 TO 48 174
Dimensions given are in round numbers. We reserve the right to make changes to our designs at any time that may not be reflected in the table. Please ask for a Certified Dimension Print for current dimensions.

The sizes and capacities listed above are a reference to the most common sizes of this equipment. If you have a different capacity, irregular size or some other need that must be met by our equipment, we will be happy to design one of these pieces of equipment to meet your special needs while also meeting or exceeding our interpretation of the appropriate ANSI / ASME. standards.

Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.

Copyright © 2018 · All Rights Reserved · Downs Crane & Hoist Company, Inc.
Designers and manufactures of "Below the Hook" material handling equipment.

Contacts